AirLive DS-100 v2 User Manual
Page 24
Advertising
4. Web Management in Device Server
AirLive DS-100 v2 User’s Manual
21
Step 5. DS-100 v2 Link Test.
After reboot, the DS-100 v2’s Status LED should be ON. Press FUNCTION button, the
Status
LED should be FLASH. Select in number 1 and press Enter button, the Thermal
Printer should be print “Thermal Printer Link Test!” message. Press CANCEL button to
stop function event, the Status LED should be ON.
Step 6. Generate On-Demand's Ticket from Thermal Printer.
Press POS or PRE button, select desired Billing Plan (e.g Plan 0~2 for this example) and
click Enter button to print ticket for your visitor. This ticket contains a unique login
Passcode
.
(1) Plan 0:
(2) Plan 1:
Advertising