AirLive Ether-FSH2422W - Manual (Page 11)

5
2-3-1 Gigabit port LED Indicator
The following table provides descriptions of Gigabit ports’ LEDs status and their meaning.
LED Status Description
Act/Duplex
Green The port works in 10/100 Full-duplex or gigabit mode
Blinks
(continuously)
Networking is active
Blinks
(off for about 2
seconds and on
alternatively)
The port works in 10/100 Half-duplex mode
Off No device attached
Speed
Green The port works at speed of 1000Mbps
Blinks The port works at speed of 100Mbps
The Descriptions of Gigabit port LED Indicators
2-4 Rear Panel
The 3-pronged power plug is located at the rear panel of the Ether-FSH2422W shown below. The
switch will work with AC in the voltage range between 100 and 240V and Frequency of 50-60Hz.
AC INPUT
100-240VAC 50/ 60Hz 0.8A MAX
Power
The Rear Panel of Ether-FSH2422W