AirLive Ether-FSH2422W - Manual (Page 29)

AirLive Ether-FSH2422W User’s Manual
23
4-6-2 VLAN Mode
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a
VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a
“tag” into the Ethernet frames. Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.
Please notice that this page is only for Tag Based VLAN.
VLAN Mode interface
„ VLAN Mode: Displays VLAN mode.
„ UplinkPort/Tag Mode: There are four radio buttons—Uplink, AddTag, don’t care, and
RemoveTag—for selecting.
¾ Uplink: In normal operation, if the destination and source are located in different VLANs,
the packets will be dropped. Having ticked the radio button, the port is configured as an