AirLive Ether-FSH2422W - Manual (Page 45)

39
Updating Firmware to the flash interface
After a while, the message shows as below to indicate the user that the update process is complete.
Update Complete message on web
As for TFTP firmware update, users can get into the command prompt window to proceed. The
command prompt window can be opened by entering "cmd" (without quotes) into Start-Run or through
Start-All Programs-Accessories. A black and white window (the colors can be changed) containing
the command prompt will open. Type in “tftp -i 192.168.10.1 put xxx.bin” (xxx means the file name of
the firmware) and press enter to update.