AirLive ES-6000 - Manual (Page 37)

36
4.1.4 Mail Relay
Mail Relay works to define the available IP subnet or domain to allow replaying mail via the mail server.
Enabling Replay to an IP subnet or Domain Name
Preparation
Perimeter Firewall set as 192.168.0.0 / 24
ES-6000 Virtual IP Address set as 192.168.0.248
ES-6000 Physical IP Address set as 60.250.158.64
Map registered domain name “airlive.com” to DNS IP address which is assigned mail server IP to MX record.
Step1. Enable internal senders to send mails, please go to Mail Management Æ Configure Æ Mail
Relay for settings :
„ Click New Entry to enter the first entry.
„ Check IP Address . (This enables relay to this IP address)
„ IP address set as 192.168.0.0
„ Netmask set as 255.255.255.0
„ Click OK to complete the first entry. (Figure 4-17, 4-18)
„ Click New Entry to enter the second entry.
„ IP address set as 60.64.125.55
„ Netmask set as 255.255.255.255
„ Click OK to complete the second entry. (Figure 4-19, 4-20)
Figure 4-17 Enter the first entry to enable relay
Figure 4-18 Complete the first entry