5 install the camera in lan – AirLive FE-200VD User Manual

Page 12

Advertising
background image

1. Introduction

AirLive FE-200VD Manual

6

4. Mount the camera onto the suitable position, and then fasten the screws.

5. Close the cover and fasten the screws.


1.5 Install the Camera in LAN

1. Plug an Ethernet cable into the Camera

Connect an Ethernet cable to the LAN socket and attach it into the network.


2. Connect the external power supply to Camera

Connect the attached power adapter to the DC power jack of the camera.
Note:

Use the power adapter, 12VDC, included in the package and connect it to wall

outlet for AC power.

Once you have installed the camera well and powered it on, the power LED (orange) will
turn on later. The power LED turns on, it means the system is booting up successfully.
Furthermore, if you have a proper network connection, and access to the camera, the
LAN LED (green) will flash.

Advertising