AirLive FE-200VD - Manual (Page 39)

4. Administrating the Device
AirLive FE-200VD Manual 33
configuration, please consult your dealer or ISP.
The device can directly connect to the xDSL. However, it should be setuped on a LAN
environment to program the PPPoE information first, and then connect to the xDSL
modem. Power on again. Then, the device will dial on the ISP connect to the WAN
through the xDSL modem.
Connect to a LAN by DHCP or Fixed IP.
Access the device; enter Setting Î Network Î PPPoE as below.
PPPoE:
To enable or disable the PPPoE service here.
User name:
Type the user name for the PPPoE service which is provided by the ISP.
Password:
Type the password for the PPPoE service which is provided by the ISP.
4.5.2 Advanced
Enable or configure other network functions.
z
NTP:
Configure a NTP (Network Time Protocol) server, so that the device system date and
time can be synchronized with a specified Time Server or DHCP server.
z
HTTP:
Set the HTTP port that will be applied for Web UI access.
z
RTSP:
Set the RTSP (Video) port for video data transmission.