AirLive IAS-2000 v2 - Manual (Page 152)

IAS-2000 v2
User’s Manual
. 145
¾ Print the kernel ring buffer: It is used to examine or control the kernel ring buffer. The program
helps users to print out their boot-up messages instead of copying the messages by hand.
y
Change admin password
Besides supporting the use of console management interface through the connection of null modem, the
system also supports the SSH online connection for the setup. When using a null modem to connect to
the system console, we do not need to enter that administrator’s password to access the console
management interface. But connecting the system by SSH, we have to enter the username and
password.
The username is “admin” and the default password is also “airlive”, which is the same as for the web
management interface. The administrator’s password can be changed here. Even if the password is
forgotten and the management interface can not be accessed from the web or the remote end of the SSH,
use the null modem to connect the console management interface and set the administrator’s password
again.
Caution: Although it does not require a username and password for the connection via the serial port, the same
management interface can be accessed via SSH. Therefore, we recommend you to immediately change the
IAS-2000 v2 Admin username and password after logging into the system for the first time.
y
Restore factory default
Choose this option to reset the system configuration to the factory default settings.
y
Restart IAS-2000 v2
Choose this option to restart IAS-2000 v2.