AirLive IAS-2000 v2 - Manual (Page 78)

IAS-2000 v2
User’s Manual
. 71
5.3.1.2 POP3 Server
POP3, RADIUS, LDAP and NT Domain Server can be chosen to be the authentication method. Choose “POP3” in
the Authentication Method field, the hyperlink beside the pull-down menu will become “POP3 Setting”.
y
Server Name: Set a name for the server using numbers (0 to 9), alphabets (a to z or A to Z), dash (-),
underline (_) and dot (.) with a maximum of 40 characters, all other letters are not allowed.
y
Sever Status: The status shows that the server is enabled or disabled.
y
Postfix: Set a postfix that is easy to distinguish (e.g. Local) for the server by using numbers (0 to 9), alphabets
(a to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
y
Blacklist: There are five sets of the black lists. Select one of them or choose “None”. Please refer to 5.3.3
Black List Configuration
y
Authentication Method: There are four authentication methods, POP3, Radius, LDAP and NTDomain to
configure from. Select the desired method and then click the link besides the pull-down menu for more
advanced configuration.
y
Policy Name: There are ten policies to choose from to apply to this particular server.