AirLive IAS-2000 v2 - Manual (Page 58)

IAS-2000 v2
User’s Manual
. 51
y
Virtual Servers
This function allows the administrator to set 40 virtual servers at most, so that the computers not belonging to
the managed network can access the servers in the managed network via WAN port IP of IAS-2000 v2. Please
enter the “External Service Port”, “Local Server IP Address” and “Local Server Port”. According to the
different services provided, the network service can use the TCP protocol or the UDP protocol. In the Enable
column, check the desired server to enable. These settings will become effective immediately after clicking the
Apply button.
y
Port and IP Redirection
This function allows the administrator to set 40 sets of the IP addresses at most for redirection purpose. When
the user attempts to connect to a destination IP address listed here, the connection packet will be converted and
redirected to the corresponding destination. Please enter the “IP Address” and “Port” of Original Destination,
and the “IP Address” and “Port” of Redirect to. According to the different services provided, choose the
“TCP” protocol or the “UDP” protocol. These settings will become effective immediately after clicking Apply.