AirLive IP-200PHD - Manual (Page 13)

2. Getting Started
AirLive IP-200PHD User’s Manual 12
2
2.
Getting Started
2.1 IP Wizard
Once you have installed the Network Camera well and powered it on, the
network accessing type LED will turn on. It means the system is booting up
successfully. Furthermore, if you have a proper network connection, and
access to the Network Camera, the LED will flash green under wired mode.
When you installed the Camera on a LAN environment, you have two easy
ways to search your Cameras by IPWizard II or UPnP™ discovery. Here is the
way to execute IPWizard II to discover Camera’s IP address and set up related
parameter in a Camera.