AirLive IP-200PHD - Manual (Page 33)

4. Monitor the Image Section
AirLive IP-200PHD User’s Manual 32
4.2.3 PPPoE
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows
your device with xDSL or cable connects with broadband network directly, then
your device can dial up and get a dynamic IP address. For more PPPoE and
Internet configuration, please consult your dealer or ISP.
The device can directly connect to the xDSL, however, it should be setup on a
LAN environment to program the PPPoE information first, and then connect to
the xDSL modem. Power on again, then the device will dial on to the ISP
connect to the WAN through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or Fixed IP
• Access the device; enter Setting Î Network Î PPPoE as below