AirLive IP-200PHD - Manual (Page 44)

4. Monitor the Image Section
43
AirLive IP-200PHD User’s Manual
4.4 System – Configure and Maintain
Use this menu to perform the principal settings of the device.
4.4.1 System
DIPS (Dynamic IP Service):
To enable or disable the DIPS® (Dynamic IP Service) function.
Device ID (for DIPS):
It’s a unique number of each device for identification and this ID is used for
DIPS.
In the Appendix G, it describes how to locate your device from Internet by
DDNS service. However, we provide another easier way to do the same job
called Dynamic IP Service, DIPS®.