AirLive N.Power - Manual (Page 25)

3. Configuring the N.Power
AirLive N.Power User’s Manual
20
3.6.2 Client Mode
Example 1: Using WPS hardware button
Please push WPS button directly on the back of the device. The “WPS” LED flash will light
and the N.Power will start to survey the AP’s WPS signal in the current environment.
Within two minutes, please push WPS button on your AP device, the connection will
automatic successfully.
Example 2: WPS using PIN
Please login N.Power’s Web UI. Select Wireless Setting
change to Client mode
Client WPS Setting.
3
4
5
6