AirLive N.Power - Manual (Page 26)

3. Configuring the N.Power
21 AirLive N.Power User’s Manual
Select the SSID that you want to connect. Choose WPS mode to “Enrollee” and get a PIN
Code in the field. Then press “PIN Start” and the “WPS” LED flash will light two minutes
on the device’s housing.
Under AP site, Select Wireless Setting WPS Setting. Choose WPS mode to “PIN” then
enter the PIN Code click “Apply” and the connection will automatically configure.
Copy PIN Code
4
5
6
7
1
2
3
10
Enter PIN Code
8
9
10