AirLive N.Power - Manual (Page 41)

4. Configuration: Router Mode
AirLive N.Power User’s Manual
36
Disable: When selected, no MAC address filtering will be performed.
Allow list: When selected, data traffic from only the specified devices in the
table will be allowed in the network.
Deny list: When selected, data traffic from the devices specified in the table
will be denied/discarded by the network.
4.4.6 Bandwidth Control
Wireless Settings -> Bandwidth Control
The N.Power can limit the bandwidth by IP address or MAC address. Please first enable
the Bandwidth Control, and then select IP Control or MAC Control.
Enable Bandwidth Control: Check this box and press “Apply Change” to
enable bandwidth control
IP Control: To limit the bandwidth of one single IP address.
MAC Control: To limit the bandwidth of one single MAC address.
Upload Bandwidth: please input upstream bandwidth limit in Kbps
Download Bandwidth: please input downstream bandwidth limit in Kbps
Comment: note for the bandwidth policy