AirLive OD-2050HD - Manual (Page 31)

4. Administrating the Device
AirLive OD-2050HD User’s Manual
25
„ UPnP
To enable or disable the UPnP service here.
„ Friendly Name
Shows the friendly name of this device here.
„ UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT router on your
network, using UPnP™. Note that UPnP™ must be enabled in the NAT router first.
„ Port Range
The port range will open in NAT router.
„ External IP address
Show the IP address and port for WAN access through Internet. If NAT traversal is
configured successfully, user can use this IP address and port to access this device. The
external IP address is not shown in case NAT traversal function is failed.