AirLive OD-2050HD - Manual (Page 39)

4. Administrating the Device
AirLive OD-2050HD User’s Manual
33
4.2.3 PTZ Setting
User can configure the RS-485 protocol in this page. RS-485 is an communication
interface, in most situation, it is to be used for controlling the scanner.
„ Camera Protocol
This device can connect to a PTZ camera or speed dome camera and controls them thru
RS485 interface.
„ Camera Address
This is the camera ID set in PTZ camera or speed dome camera. Note that please DO
NOT change the default value if unnecessary. If so, user needs to check and set value
properly for both sides.
„ Baud Rate
This is the communication speed between network module and P/T scanner.