AirLive OD-2050HD - Manual (Page 44)

4. Administrating the Device
AirLive OD-2050HD User’s Manual 38
4.3.3 Maintenance
„ Hard Factory Default (Include the network setting)
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).
„ Factory Default (Except the network setting)
The unit is restarted and most current settings are reset to factory default values. This
action will not reset the network setting.
„ Backup Setting
To take a backup of all of the parameters, click this button. If necessary, it will then be
possible to return to the previous settings, if settings are changed and there is unexpected
behavior.
„ Restore Setting
Click the “Browse” button to locate the saved backup file and then click the “Restore
Setting” button. The settings will be restored to the previous configuration.
„ Firmware Upgrade
The device supports new firmware upgrade (the software that controls the operation in the
device). Please contact your dealer for the latest version if necessary.
Download the latest firmware file from our website or your dealer. Unzip this firmware file
to binary file and store it into your PC. Then follow the steps as bellows carefully