AirLive OD-2050HD - Manual (Page 42)

4. Administrating the Device
AirLive OD-2050HD User’s Manual 36
To use this service, just follow four steps below:
1. Enable DIPS function of the device
2. Check your Device ID from this page. This is a unique number for each device.
3. If your device is behind a NAT router, please configure your device properly. You could
refer to section “Install the Camera behind a NAT Router” above. You only need to do
this job one time.
4. Visiting our company’s web site, you can find DIPS service page.
„ Device Title
You can enter the name of this unit here. It’s very useful to identify the specific device from
multiple units. The information will be shown on IPWizard II once the device is found.
„ Software Version
This information shows the software version of the device.
„ Network LED
To turn on or off Network LED.
„ Power LED (Wireless LED)
To turn on or off Power LED (wireless LED if WLAN model).
„ Log
User can check the system log information of the device, including the Main Info,
Appended Info, Operator IP, and so on …
„ Reload
Click this button; user can refresh the log information of the device.
4.3.2 Date & Time
You can setup the device or make it synchronized with PC or remote NTP server. Also, you
may select your time zone in order to synchronize time locally.
„ Server Date & Time
Displays the date and time of the device.
„ PC Time
Displays the date and time of the connected PC.