AirLive OD-2050HD - Manual (Page 41)

4. Administrating the Device
AirLive OD-2050HD User’s Manual
35
„ Running
Enable or disable this camera tour.
„ Preset
Set the sequence of the tour. Maximum 16 points can be assigned. The selected preset
position is added in the Sequence list from 1 to 16.
„ Wait Time
Type a period of time during which the camera is to stay at each preset point, between 0 to
36000 seconds.
To use the camera tour function, user must preset some camera positions first.
4.3 System: Configure and Maintain System
Use this menu to perform the principal settings of the device.
4.3.1 System
„ DIPS (Dynamic IP Service)
To enable or disable the DIPS® (Dynamic IP Service) function.
„ Device ID (for DIPS)
It’s a unique number of each device for identification and this ID is used for DIPS.
In the Appendix G, it describes how to locate your device from Internet by DDNS service.
However, we provide another easier way to do the same job called Dynamic IP Service,
DIPS®.