AirLive POE-100CAMv2 - Manual (Page 52)

AirLive POE100CAMv2 User’s Manual
51
Sensor input 1: Click it on for using external sensor which is connected to sensor input1 of the camera I / O
port.
¾ Trigger condition: Select High signal output and Low signal output as your alarm.
¾ Camera move: Pull down the window to select the camera preset position.
6.2.9 Alarm buffer
You can set the Pre-alarm image and audio (the image and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm sending FTP client setting menu or Image memory
setting menu is set to On, and besides when Use alarm buffer is selected.
6.2.10 Setting
Alarm buffer: To activate the Alarm buffer function, select On. The basic setting options are displayed below.
When you do not use the Alarm output function, select Off.
¾ Recording capacity
z Pre-alarm period: Display the maximum recording capacity of image/audio before the alarm
detection.
z Post-alarm period: Display the maximum recording capacity of image/audio after the alarm
detection.