AirLive POE-100CAMv2 - Manual (Page 15)

AirLive POE‐100CAMv2 User’s Manual
14
Step 3
Step 4
Step 5
If there are more than 1 IP Camera found on your network, identified the camera you wish to setup by
the MAC address stated on the back of your camera.
If the text listing your IP Camera is show in red, you will need to initialize your camera. Click on the
Setup button on the right
You will be prompt for username and
password. The default username and
password for AirLive IP Camera are as
follows:
After you enter the username and
password, the next screen shows the
Product Name and the firmware version.
You may wish to copy down the firmware
version number for future firmware
upgrade. Click “Next” to continue