AirLive POE-100CAMv2 User Manual
Page 87
AirLive POE100CAMv2 User’s Manual
86
Motion Detection
【
Step1】Select the Image icon of a
LanCam/Video Server in the System Setup area,
and click Motion Detection button
from
the Menu Bar to bring up the Motion Detection
window.
【
Step2】Set Detection Area: A red square
follows mouse movement, click to place the red
square to the area of motion detection or click to
deselect a specified area. Any motion within the
detected area should over the threshold of
sensitivity to trigger a motion detection alarm.
【
Step3】Sensitivity and Frequency setting.
Sensitivity refers to the pixels of image changes,
and Frequency refers to the No of frame
mapping.
【
Note】
The size of red frame is configurable in Motion Detection Granularity, details please refer to Section
D.3.8. Motion Rectangle.
Different camera may have different interface for motion detection adjustment. Some may require you to
install Active-X components.