AirLive POE-100CAMv2 User Manual
Page 91
AirLive POE100CAMv2 User’s Manual
90
1. Node: is the serial number of this relay on the current device.
2. Location: give a meaningful name for this relay.
3. Default Status: set the default status of this relay.
4. Click [Create] to save the configuration and leave the dialog, or click [Apply] to save the configuration and
continue to set another relay on the current device or modify current setting.
Remove Relay
Click the [Remove Relay] button to remove the selected Relay. You will be asked to confirm the deletion.
Tools in Menu Bar of eMap interface
eMap tools bar will appear above the eMap
Interface area after the picture that you uploaded
to the eMap Interface area.
The tools of eMap interface could be used to control the EMap background as following:
(a) Pointer：to drag the device icon on the interface
(b) Area Zoom：to enlarge background from the specified area selected by mouse
(c) eMap Shift：to move the background
(d) Center Zoom In：to enlarge background from the center
(e) Center Zoom Out：to downsize background from the center
(f) Default
Size：back to the default size and location