AirLive PoE-2600HD - Manual (Page 11)

1. Introduction
7 AirLive PoE-2600HD/
WN-2600HD User’s Manual
Rear View
z Audio Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
z DC Power Jack
The input power is 12VDC. Note that supply the power to the Camera with the power
adapter included in package. Otherwise, the improper power adapter may damage the unit
and result in danger.
z Antenna Connector
User can attach the included antenna to this connector (SMA type) or use another
high-gain antenna to get higher performance.
z Factory Default Reset
This button is hidden in the pinhole. This button is used to restore the all factory default
settings. Sometimes restarting the camera will make the system back to a normal state. If
the system still got problems after restart, user can restore the factory default settings and
install it again. To restore the device, please follow the steps below: