AirLive PoE-2600HD - Manual (Page 57)

4. Administrating the Device
53 AirLive PoE-2600HD/
WN-2600HD User’s Manual
z White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
z Exposure Control:
Auto: will adjust the internal gain automatically.
Hold: will hold the internal gain.
z Color Level:
Large value will be colorful.
z Brightness:
Large value will brighten camera.
z Sharpness:
Large value will sharpen camera.
z Contrast:
Large value will contrast camera heavily.
z Night Mode:
User can turn Auto or Off of the night mode. This function is very useful under low
illumination environment.
z White-Light LED:
User can turn On, Off, Auto or Schedule of the built-in White-light LEDs. This function
is very useful under low illumination environment even 0 Lux.
In case the Auto mode is selected, user needs to specify 3 parameters in advance:
LED ON Threshold (0~10000): this value set the threshold to turn on white-light LED.
It should be lower or equal to LED OFF Threshold.
LED OFF Threshold (0~10000): this value set the threshold to turn off white-light LED.
It should be higher or equal to LED ON Threshold.
Delay Time: The delay time between LED ON/OFF switching.
Note that Current Value is the current luminance from the captured video. It’s a useful
reference to set LED ON/OFF Threshold.