AirLive PoE-2600HD User Manual
Page 43
4. Administrating the Device
39 AirLive PoE-2600HD/
WN-2600HD User’s Manual
Step 2: Key in security key of WEP or WPA. Then click “OK” button to activate wireless
setting.
In case, user wants to configure wireless settings manually, please follow the steps as
below:
z
MAC address:
Displays the Ethernet MAC address of the WLAN card. Note that user can not change
it.
z
Site survey:
Click the “Refresh” button. It will refresh information window which list is the result of a
network scan. Access points with a disabled SSID Broadcast will not appear unless
the camera is associated with it. The following information is provided:
z
Interface Select:
“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise wireless”:
Choose wired or wireless mode. However, note that wired is priority.