AirLive PoE-2600HD - Manual (Page 15)

1. Introduction
11 AirLive PoE-2600HD/
WN-2600HD User’s Manual
1.5 Install the Camera in LAN
1. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the camera’s rear and attach it to
the network.
Ethernet
Cable
2. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the camera. Note: Use the
power adapter, 12VDC, included in the package and connect it to wall outlet for AC power.
Power
Cable
Once you have installed the camera well and powered it on, the power LED will turn on
later. The power LED turned on, it means the system is booting up successfully.
Furthermore, if you have a proper network connection, and access to the camera, the LED
will flash blue under wired mode.