AirLive POE-FSH808AT - Manual (Page 10)

2. Installation of the Switch
AirLive POE-FSH808AT User’s Manual 5
2
2.
Installation of the
Switch
This chapter provides the detailed instructions for installation of the switch. For concise
installation instruction, the previous chapter’s “
Quick Setup” section provides all the
important information including IP address, password, and LED table for user’s reference.
2.1 Unpack the Package
Before you begin the installation of POE-FSH808AT Management Switch, make sure that
you have all the necessary accessories that come with your package. Follow the steps
below to unpack your package contents:
1. Clear out an adequate space to unpack the package carton.
2. Open the package carton and take out the contents carefully.
3. Put back all the shipping materials such as plastic bag, padding and linings into the
package carton and save them for future transport need.
After unpacking and taking out the entire package contents, you should check whether you
have got the following items:
 POE- FSH808AT
 One AC Power Cord
 Quick Install Guide
 Support CD-ROM (The PDF version of this User’s Manual can be found within CD)
 Rack Mount Kit
If any of these above items is missing or damaged, please contact your local dealer for
replacement.