AirLive POE-FSH808AT - Manual (Page 22)

4. Web Management
AirLive POE-FSH808AT User’s Manual 17
On the Switch
 On the IP setting, set the gateway to Router’s LAN port address 192.168.0.254.
 Please make sure the subnet mask is the same as the router’s.
On the Router
 Go to router’s Virtual Server setting and open the Web port (TCP Port 80) to the switch’s
IP address 192.168.0.200.
 If your router require enter the beginning and ending Port (from PortX to PortX), enter
80 for both.
Now the Remote PC will be able to access your switch by entering “ 201.100.1.5” in the
Web browser’s address field.
4.3 Get Into the Web management
After you have properly configured the computer and switch’s IP, you can get into the web
management by the following steps:
Step 1. Open the Internet Explorer
Step 2. Enter the switch’s IP address in the Address field and press enter.
Step 3. When prompt for User’s name and Password, enter the following
information:
 User’s Name: admin
 Password: airlive
You should see the following welcome screen after the process is completed: