AirLive POE-FSH808AT - Manual (Page 26)

4. Web Management
AirLive POE-FSH808AT User’s Manual 21
 MAC Address: Displays the unique hardware address assigned by manufacturer
(default).
 Number of Ports: Displays number of ports in the switch.
 Comment: You can type some comment for the switch.
 System Version: Displays the switch’s firmware version.
And then click Update button.
4.4.4 Load Default Setting
Configuration Clicking the “ Load” button will make the switch being set to the original
configuration.
* Note: This change only concerns the switch behavior, excluding the change for user
name, password and IP configuration. After Load Default is executed, the all settings will be
restored to default setting.
4.4.5 Firmware Update
Before the firmware update procedure is executed, you should enter the password twice
and then press Update button. The smart switch will erase the flash memory. There is a
self-protection mechanism in the Boot Loader, so the Boot Loader will keep intact. Even
though the power is turned off or the cable link fails during the firmware update procedure,
the Boot loader will restore the code to firmware update page.