AirLive POE-FSH808AT - Manual (Page 48)

4. Web Management
AirLive POE-FSH808AT User’s Manual 43
4.10.2 STP Port Settings
The STP Port Setting page allows you to change the port priority and its path cost.
After STP/RSTP is enabled, the system automatically assigns the port priority and path
cost to the prot. Normally, it is necessary to change the parameters, however, you may
need to control the root switch or block port in some condition.
This page allows you to change the STP port setting. Select the port number, type the
value of the Priority and Root Path Cost.
Click
"Submit" to apply the settings.