AirLive POE-FSH808PW - Manual (Page 44)

4. Web Management
AirLive POE-FSH808PW User’s Manual 39
 MAC Address: Users can assign up to 3 MAC addresses to the port.
 Select Port: Select the port number and click "Read" button. If you don't enter any MAC
Address before, the address is blank. If you have entered any MAC address, the field
will display the MAC addresses your previously entered.
 Read: Pull down the selection bar to choose a port number and click the read button to
show the MAC addresses bound with the port or modify the MAC addresses.
 Binding: Enable or disable the binding function.
After selected the port, enabled Binding and entered MAC Address, click "Update" to
update and save the settings.
*Note: Setting the multicast address to these fields is not allowed. A warning message will
show up if you do so.
4.9.2 TCP/UDP Filter
By selecting the TCP/UDP port, the network administrator can optionally block some
specific applications. There are two kinds of protocol filter functions. The”
forward” function
makes the switch forward the selected protocol and drops other protocols. The” deny”
function makes the switch drop the selected protocol and forward other protocols. The
protocol is checked at the selected secure WAN port. And it should be set at the server
side.