AirLive Traveler3G II - Manual (Page 34)

AirLive Traveler 3G II User’s Manual
30
Auto Reconnect (Always-on): The device will link with ISP until the
connection is established.
Manually: The device will not make the link until someone clicks
the connect-button in the Status-page.
3. Maximum Idle Time: the amount of time of inactivity before
disconnecting your PPPoE session. Set it to zero or enable
Auto-reconnect to disable this feature.
4. PPPoE Service Name: optional. Input the service name if your ISP
requires it. Otherwise, leave it blank.
5. Maximum Transmission Unit (MTU): Most ISP offers MTU value to
users. The default MTU value is 0(auto).