AirLive Traveler3G II - Manual (Page 82)

AirLive Traveler 3G II User’s Manual
78
 Routing
1. Routing Tables
Allow you to determine which physical interface address to use for outgoing IP data
grams. If you have more than one routers and subnets, you will need to enable
routing table to allow packets to find proper routing path and allow different subnets
to communicate with each other.
Routing Table settings are settings used to setup the functions of static and dynamic
routing.
2. Dynamic Routing
Routing Information Protocol (RIP) will exchange information about destinations for
computing routes throughout the network. Please select RIPv2 only if you have
different subnet in your network. Otherwise, please select RIPv1 if you need this
protocol.
3. Static Routing