AirLive Traveler3G II - Manual (Page 48)

AirLive Traveler 3G II User’s Manual
44
 Wireless Settings
Wireless settings allow you to set the wireless configuration items.
1. Wireless: Enabled is the default. Selecting this option will allow you to
set your Wireless Access Point (WAP) settings.
2. Transmit Power: Configure the wireless output power here.
3. Network ID (SSID): Service Set Identifier (SSID) is the name
designated for a specific wireless local area network (WLAN). The
SSID's factory default setting is default. The SSID can be easily
changed to establish a new wireless network. ( Note: SSID names may
contain up to 32 ASCII characters).
4. SSID Broadcast: The router will broadcast beacons that have some
information, including ssid so that wireless clients can know how many
AP devices by scanning function in the network. Therefore, this function
is disabled; the wireless clients can not find the device from beacons.
5. Channel: Auto is the default. Devices on the network must share the
same channel. (Note: Wireless adapters automatically scan and match