AirLive Traveler3G II - Manual (Page 80)

AirLive Traveler 3G II User’s Manual
76
 SNMP
In brief, SNMP, the Simple Network Management Protocol, is a protocol designed to give a
user the capability to remotely manage a computer network by polling and setting terminal
values and monitoring network events.
1. Enable SNMP
You must check Local, Remote or both to enable SNMP function. If Local is checked,
this device will response request from LAN. If Remote is checked, this device will
response request from WAN.
2. Get Community
Setting the community of GetRequest your device will response.
3. Set Community
Setting the community of SetRequest your device will accept.
IP 1, IP 2, IP 3, IP 4