AirLive WLA-9000AP PCBA User Manual
Page 30
3. Basic Configuration
As node of Client WPA-PSK, please check with your network administrator for the
Pre-shared Key for more detail of your network.
3.3.2.3 Advances Wireless Settings
Current Operational mode >> Advanced Settings
When click on Advanced Setup button under client mode, a pop-up window appears and
show parameter as follow:
RTS Threshold: RTS/CTS frames are used to gain control of the medium for transmission.
Any unicast (data or control) frames larger than specified RTS threshold must be
transmitted following the RTS/CTS handshake exchange mechanism. The RTS threshold
should have a value between 256-2347 bytes, with a default of
2347. It is recommended
that this value does not deviate from the default too much.
25
AirLive WLA-9000AP User’s Manual