AirLive WLA-9000AP PCBA - Manual (Page 32)

3. Basic Configuration
To add a MAC address into the table, enter a Mnemonic Name and the MAC Address,
and then click ADD. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding Select boxes and then press DELETE
SELECTED.
FINISH SETUP WIZARD AND SAVE YOUR SETTINGS
After stepping through the Wizard’s pages, you can click the APPLY button for your
modification to take effect. This also makes your new settings saved into the permanent
memory on your system.
Congratulations! You are now ready to use the WLA-9000AP.
If you change the device’s IP address, as soon as you click on FINISH
you will no longer be able to communicate with your WLA-9000AP.
You need to change your IP address and then re-boot your computer
in order to resume the communication.
27
AirLive WLA-9000AP User’s Manual