AirLive WLA-9000AP PCBA User Manual
Page 35
3. Basic Configuration
3.3.3.2 ACCESS CONTROL
Current interface >> Access Control
The WLA-9000AP allows you to define a list of MAC addresses that are allowed or denied
to access the wireless network. Click on the setup button of “Access Control” of selected
wireless interface.
Disable MAC address control list: When selected, no MAC address filtering will be
performed.
Enable GRANT address control list: When selected, data traffic from only the specified
devices in the table will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices specified
in the table will be denied/discarded by the network.
To add a MAC address into the table, enter a
Mnemonic Name and the MAC Address,
and then click
ADD. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding
Select boxes and then press DELETE
SELECTED.
FINISH SETUP WIZARD AND SAVE YOUR SETTINGS
After stepping through the Wizard’s pages, you can click the
APPLY button for your
modification to take effect. This also makes your new settings saved into the permanent
memory on your system.
AirLive WLA-9000AP User’s Manual
30