AirLive WLA-9000AP PCBA User Manual
Page 31
3. Basic Configuration
Fragmentation: When the size of a unicast frame exceeds the fragmentation threshold, it
will be fragmented before the transmission. It should have a value of 256-2346 bytes, with a
default of
2346. If you experience a high packet error rate, you should slightly decrease the
Fragmentation Threshold.
Transmit Power: Transmit power output depends upon the size and RF characteristics
because that will determine the number of APs, channels, and need for antennas.
Ack TimeOut (for all modes): The "ACK time-out" determines how long the program waits
after receiving a packet from a file stream to determine that stream to be a complete file.
For details, please go to
3.3.2.4 ACCESS CONTROL
Current interface >> Access Control
The WLA-9000AP allows you to define a list of MAC addresses that are allowed or denied
to access the wireless network. Click on the setup button of “Access Control” of selected
wireless interface.
Disable MAC address control list: When selected, no MAC address filtering will be
performed.
Enable GRANT address control list: When selected, data traffic from only the specified
devices in the table will be allowed in the network.
Enable DENY address control list: When selected, data traffic from the devices specified
in the table will be denied/discarded by the network.
AirLive WLA-9000AP User’s Manual
26