AirLive WLA-9000AP PCBA User Manual
Page 34
3. Basic Configuration
3.3.3.1 Advances Wireless Settings
Current Operational mode >> Advanced Settings
When click on Advanced Setup button under client mode, a pop-up window appears and
show parameter as follow:
RTS Threshold: RTS/CTS frames are used to gain control of the medium for transmission.
Any unicast (data or control) frames larger than specified RTS threshold must be
transmitted following the RTS/CTS handshake exchange mechanism. The RTS threshold
should have a value between 256-2347 bytes, with a default of
2347. It is recommended
that this value does not deviate from the default too much.
Fragmentation: When the size of a unicast frame exceeds the fragmentation threshold, it
will be fragmented before the transmission. It should have a value of 256-2346 bytes, with a
default of
2346. If you experience a high packet error rate, you should slightly decrease the
Fragmentation Threshold.
Transmit Power: Transmit power output depends upon the size and RF characteristics
because that will determine the number of APs, channels, and need for antennas.
Ack TimeOut (for all modes): The "ACK time-out" determines how long the program waits
after receiving a packet from a file stream to determine that stream to be a complete file.
For details, please go to
29
AirLive WLA-9000AP User’s Manual