AirLive WN-250R - Manual (Page 50)

2. System and Network Setup
41 AirLive WN-250R User’s Manual
To do so, please follow the following instructions:
Please click ‘System’ menu on the left of web management interface, then click ‘Remote
Management’, and the following message will be displayed on your web browser:
Here are descriptions of every setup items:
Host Address (1): Input the IP address of the remote host you wish to initiate a
management access.
Port (2): You can define the port number this router should expect an
incoming request. If you’re providing a web service (default port
number is 80), you should try to use other port number. You can use
the default port setting ‘8080’, or something like ‘32245’ or ‘1429’.
(Any integer between 1 and 65534)
Enabled (3): Select the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the following message
displayed on web browser:
1 2 3
4