AirLive WN-250R - Manual (Page 85)

2. System and Network Setup
AirLive WN-250R User’s Manual 76
2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:
In this mode, you can connect your wireless router with at least four wireless routers to
expand the scope of wireless network, and all clients (wired only – AP will not accept
wireless clients in this mode) of the wireless routers will think they’re on the same physical
network.
Here are descriptions of every setup items:
Band (2): Select the band you want to use, all the wireless routers must use
the same setting.
Channel Select the channel you want to use, all the wireless routers must
Number (3): use the same setting.
MAC address Input the MAC address of other wireless routers.
1 to 4 (4 - 7):
Security Click to set security settings for this connection (Please go to
Setting (8): section ‘2-7-3 Wireless Security’ for detailed instructions).
1
2
3
4
5
6
7
8