AirLive WN-250R - Manual (Page 87)

2. System and Network Setup
AirLive WN-250R User’s Manual 78
Associated Clients (5): Click ‘Show Active Clients’ button, then an “Active Wireless
Client Table” will pop up. You can see the status of all active
wireless stations that are connecting to the access point.
MAC address Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security Click to set security settings for this connection (Please go
Setting (10): to section ‘2-7-3 Wireless Security’ for detailed instructions).
2-7-1-6 Setup procedure for ‘Universal Repeater’
In this mode, the router can act as a wireless repeater; it can be Station and AP at the same
time. It can use Station function to connect to a Root AP and use AP function to service all
wireless stations within its coverage.
1
2
3
4
5
7
6
NOTE: For Repeater Mode, this router will demodulate the received
signal, checking if this signal is noise for the operating network then
have the signal modulated and amplified again. The output power of
this mode is the same as that of WDS and normal AP mode.