AirLive WN-250R - Manual (Page 90)

2. System and Network Setup
81 AirLive WN-250R User’s Manual
Here are descriptions of every setup items:
Fragment Set the Fragment threshold of wireless radio.
Threshold (1): Do not modify default value if you don’t know what
it is, default value is 2346.
RTS Threshold (2): Set the RTS threshold of wireless radio. Do not modify default
value if you don’t know what it is, default value is 2347.
Beacon Interval (3): Set the beacon interval of wireless radio. Do not modify
default value if you don’t know what it is, default value is
100.
DTIM Period (4): Set the DTIM period of wireless radio. Do not modify default
value if you don’t know what it is, default value is 3.
Data Rate (5): Set the wireless data transfer rate to a certain value. Since
most of wireless devices will negotiate with each other and pick
a proper data transfer rate automatically, it’s not necessary to
change this value unless you know what will happen after
modification.
N Data Rate (6): Same as above, but only for 802.11n clients.
Channel Width (7): Set channel width of wireless radio. Do not modify default
value if you don’t know what it is, default setting is ‘Auto
20/40 MHz’.
Preamble Type (8): Set the type of preamble, do not modify default value if you
don’t know what it is, default setting is ‘Short Preamble’.