AirLive WN-300R - Manual (Page 53)

Configure this screen as follows:
• Set
Network Authentication to match the Wireless Router. (If the setting on the
Wireless Router is "Auto", then either Open or Shared can be used.)
• For Data Encryption, select WEP.
• For the Network key and Confirm network key, enter the default key value used
on the Wireless Router. (Windows will determine if 64bit or 128bit encryption is
used.)
• The Key index must match the default key index on the Wireless Router. The
default value is 1.
• Ensure the options The key is provided for me automatically and This is a com-
puter-to-computer (ad hoc) network are unchecked.
• Click OK to save and close this dialog.
• This wireless network will now be listed in Preferred Networks on the screen
below.
Figure 32: Preferred Networks
Click OK to establish a connection to the Wireless Router.
AirLive WN-300R User’s Manual 47