For the wireless router's routing table, For router a's default route, For router b's default route – AirLive WN-300R User Manual
Page 95: 9 upgrade firmware, Upgrade firmware
For the Wireless Router's Routing Table
For the LAN shown above, with 2 routers and 3 LAN segments, the Wireless Router
requires 2 entries as follows.
Entry 1 (Segment 1)
Destination IP Address
192.168.1.0
Network Mask
255.255.255.0 (Standard Class C)
Gateway IP Address
192.168.1.25400 (Wireless Router's local
Router)
Metric 2
Entry 2 (Segment 2)
Destination IP Address
192.168.2.0
Network Mask
255.255.255.0 (Standard Class C)
Gateway IP Address
192.168.1.25400
Metric 3
For Router A's Default Route
Destination IP Address
0.0.0.0
Network Mask
0.0.0.0
Gateway IP Address
192.168.1.254 (Wireless Router's IP
Address)
For Router B's Default Route
Destination IP Address
0.0.0.0
Network Mask
0.0.0.0
Gateway IP Address
192.168.1.80 (Wireless Router's local
router)
7.9 Upgrade Firmware
The firmware (software) in the Wireless Router can be upgraded using your Web
Browser.
You must first download the upgrade file, then select Upgrade Firmware on the Ad-
ministration menu. You will see a screen like the following.
Figure 65: Router Upgrade Screen
AirLive WN-300R User’s Manual
89