AirLive WN-300R - Manual (Page 99)

Data - Mode Screen
Device
Name This field displays the current name of this device.
Device
Mode Select the desired device mode for the router:
• Router - In this mode, this device can provide shared Internet
Access to all your LAN users. Also, by default, it acts a DHCP
Server, providing an IP address and related information to all
Wireless and LAN users.
• Access Point - The device links your Wireless Stations to your
wired LAN. The Wireless stations and devices on the wired
LAN are then on the same network, and can communicate with
each other without regard for whether they are connected to the
network via a Wireless or wired connection.
After changing the mode, this device will restart, which will take a
few seconds. The menu will also change, depending on the mode
you are in.
IP Address The IP Address of this device. Use the default value unless the
address is already in use or your LAN is using a different IP ad-
dress range.
Subnet
Mask The Network Mask associated with the IP Address above.
8.5 Operation
Operation is automatic.
• Wireless clients can connect to the Access Point if they have the correct SSID
and security, but they must obtain an IP address from the DHCP Server on your
LAN.
8.6 Status Screen
In Modem mode, the Status screen looks like the example below.
AirLive WN-300R User’s Manual 93